Product Overview
Ready Mix Plaster is a premixed cement based plaster consisting of a proportionate mixture of Portland cement, well-graded and washed sand and high-quality polymer additives and fillers. Water needs to be added before application as plaster on both inner and outer walls. It is a perfect, hassle free substitute to the traditional site mixed plastering mortar, as there is no need of screening and washing sand and supervise appropriate mixture ratio.
Application: Can be applied on any kind of well-prepared Internal or External wall:
– AAC Block Walls
– Fly Ash Brick Walls
– Clay Brick Walls
– Concrete Block Walls
– Concrete Surfaces
Recommended Coating:
Internal Wall: Single coat of 8-10mm for Internal Wall Plaster.
External Wall: Two coats are recommended – base coat of 8 – 12 mm and finish coat of 8-12 mm. 2-3 days of curing is required after base coat.
Features:
- Pre-mixed and available in bags
- Consistent quality manufactured in automated computerized plant
- Excellent coverage: Due to lower density and high volume, it covers 15-20 sq. ft./bag with a thickness of 10-12mm
- Specially added polymers to lower the shrinkage cracks in the mortar
Benefits:
- Very high degree of compressive and tensile strength and load-bearing capacity
- Uniform and smooth finish to walls
- Easy handling and convenient to apply
- Reduced labor and supervision cost
- Faster application
- Needs less curing and binds better
- Easy handling and storage due to packaging
Technical Specifications
| Parameters | Specifications |
|---|---|
| Appearance | Free Flowing Powder and Grey in Color |
| Bulk Density | 1.2 – 1.7 Kg/litre unit |
| Compressive Strength (MPa) | More than 6 in 28 days |
| Pull off Adhesion | EN 1015 – 12: 0.3 MPa |
| Water Retentivity | EN 1015 – 8: Min 95% |
| Coverage | 15–20 sq.ft / 40 kg bag (for 10–12 mm thickness) |
| Proportion of Water (%) | 15–20% as per weight |
| Pot Life | More than 1 hour |
| Shelf Life | 6 months from date of manufacture |
Application Process
| Step | Action | Detailed Instructions |
|---|---|---|
| 1 | Surface Preparation | Clean the wall surface to remove oil, grease, paint, loose plaster, dust, or dirt particles. भित्तामा लागेको चिल्लो, तेल, रंग र धुलोलाई राम्रोसँग सफा गर्नुहोस्। |
| 2 | Wetting | If the surface is dry, lightly dampen it using clean water before application. यदि भित्ता सुख्खा छ भने सफा पानीले हल्का भिजाउनुहोस्। |
| 3 | Mixing | Mix 1 bag (40kg) of Sagarmatha Ready Mix Plaster with 6–7 litres of clean water. Use a mechanical mixer for best results. ४० केजी प्लास्टरलाई ६–७ लिटर सफा पानीमा मिसाउनुहोस्। मेसिन प्रयोग गर्नु उत्तम हुन्छ। |
| 4 | Reaction Time | Allow the mixture to rest for 5–10 minutes before application. मिसाएको सामग्रीलाई ५–१० मिनेट जति छोडिदिनुहोस्। |